Infinity Kappa One 6 Mono Class-D 600W Car Subwoofer Amplifier

Description

Electronic Express eBay Listing Description
Infinity KAPPA one 6 High-performance mono Class D amplifier
Key Features:
Class D Design
Low Distortion
Full On-Board Protection
Proprietary High-Conductivity Terminals
Compact footprint
Sleek design
DBO (Dynamic Bass Optimizer)
Remote Bass Control
What's in the box:
1 x Amplifier
2 x Differential Speaker-Level Adapter
2 x Spare Fuses
4 x Philip Screws
1 x Remote Bass Control & Cable
1 x E.A.R.L Terminal
3 x Self-Tapping Screws
1 x Owner’s Manual
Specifications:
Operating voltage:
9-16 volts
RMS Power @ 4 ohms:
380W
RMS Power @ 2 ohms:
600W
Total peak power:
1500W
Frequency response:
10Hz – 320Hz @ -3dB
Crossover filter:
LPF 32Hz – 320Hz
Variable 12dB/Oct
Bass EQ:
10Hz-80Hz variable 0-12dB
THD + N at rated power:
≤0.1%
High input maximum signal level:
20V
High input maximum sensitivity:
2V
Line input maximum signal level:
20V
Line input maximum sensitivity:
0.2V
Line-in signal-to-noise ratio (reference to 1 watt):
≥80dB
Quiescent current draw:
≤1.7A
Fuse size:
2 x 35A
Dimensions (HxWxD):
1.7" x 7" x 10.2"
Weight:
5.8 lbs.
Class D Design
Every Kappa amplifier, including the full-range models, features high-efficiency Class D topology. This technology allows Infinity to engineer amplifiers that are more compact, generate less heat, and draw less current from the vehicle’s electrical system.
Low Distortion
Infinity’s Kappa amplifiers have been engineered to deliver the lowest distortion possible, enhancing the audio experience regardless of output level.
Full On-Board Protection
Infinity Kappa amplifiers have on-board circuitry to protect from shorts, temperature, overvoltage and undervoltage. An LED indicator is included on all five models to let the user know when one of these conditions exists.
Proprietary High-Conductivity Terminals
All Infinity Kappa amplifiers equipped with newly introduced E.A.R.L terminal for better grounding.
Compact footprint
With it becoming more and more difficult to find spacious locations for amplifier mounting, Infinity Kappa amplifiers have been developed in a small compact form factor to allow more location versatility.
Sleek design
Sometimes, an amp can be as stylish as it is powerful. With anodized aluminum and screwdriver access concealed by a magnetically attached panel, Infinity Kappa amplifiers have a clean, streamlined industrial design.
DBO (Dynamic Bass Optimizer)
Kappa amplifiers feature a subsonic filter with variable frequency and Q. For sealed enclosures, set the Frequency Control to 35Hz, and then adjust the Boost Control to your preference. For vented enclosures, set the Frequency Control to 10Hz below the port tuning, then adjust the Boost control to your preference.
Remote Bass Control
The mono amplifier comes with a remote bass control. This allows for increasing or decreasing bass independent of the head units tone controls. The benefit is total control over just the bass output. The tuning is right at driver’s finger tips