HP Code master XL Plus Defibilitator. FAST SHIPPING - RARE LISTING

Description

Hewlett-Packard Defibrillator Code Master XL+ 360 Joules.
The main part of the description are the photos.  Everything included is in the photos.  If you don't see it in the photos it is not included....
I am not a doctor and do not know how to use the apparatus so yes, I didn't test it.  Also, the AC cord is not included.
Codemaster XL Specifications
Dimensions
Height: 7.9” (20 cm)
Width: 11.8” (30 cm)
Depth: 15.6” (39.7 cm)
Weight: 24 lbs (10.9 kg)
Defibrillator
Waveform: Damped sinusoidal (Lown)
Output Energy: 2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, and 360 joules
Charge Control: Push-button on apex paddle and on front panel
Charge Time: Less than 5 seconds to 360 joules with battery present. Less than 15 seconds to 360 joules on AC only
Armed Indicators: Charge done tone, charge done lamp on apex paddle, and available energy indicated on display
Paddle Contact Indicator (optional): 3-color LED bar graph array on STERNUM paddle indicates quality of defibrillator paddle contact before discharge
Paddles: Standard paddles are anterior/anterior, adult and pediatric. Adult electrodes (83 cm2) slide off to expose pediatric electrodes (21 cm2). Paddle cord is 10 ft (3 m). Full range of internal paddles available
Monitor
Inputs: ECG may be viewed through paddles or patient cable. Lead I, II, III, or PADDLES selectable. Additional leads (aVR, aVF, aVL, V Leads) and PADS are available. Monitor and recorder indicate selected ECG source
Lead Fault: LEADS OFF message and dashed baseline appear on monitor if a lead becomes disconnected
Common Mode Rejection: Greater than 100 dB measured as per AAMI standards for cardiac monitors (EC13)
Display Size and Type: 5 inch (12.7 cm) diagonal CRT for 4 seconds of ECG data on screen; non-fade, fixed trace. Scrolling trace is selectable
Sweep Speed: 25 mm/sec nominal
Frequency Response: 0.5 to 40 Hz
Heart Rate Display: Digital readout on monitor from 15 to 300 BPM.
Heart Rate Alarms: Three pre-set pairs of high and low heart rate alarm limits from 20 to 280 BPM. (Configurable pairs are optional.)
ECG Output: 1V/mV
Patient Cable Length: 10 ft (3 m)
Thermal Array Recorder
Event Summary (optional): Stores and prints 3 seconds pre- and 8 seconds post-critical event data for up to 28 events. Data retained after unit is turned off
Annotates: Time, date, HR, event marker, ECG mode, defibrillator mode, selected energy, actual delivered energy, peak current, and patient impedance
Speed: 25 mm/sec.
Paper Size: 50 mm by 30 m (100 ft)
Recorder Mode: Automatically documents events and ECG during defibrillation episodes. The recorder can be configured to run in either real-time or with a six-second delay
Frequency Response: 0.5 to 40 Hz or 0.05 to 150 Hz selectable
This item was purchased from a College Surplus Sale.  YES IT is functional, BUT it was used for training purposes for healthcare students at Rowan U in NJ and because it was not "live", it was marked as "Non Functional,  training use only", which was so someone wouldn't attempt to save a life with a training tool, which would have made the college liable.  This means it was not recently calibrated, but also means IT IS NOT WORN OUT.
Item weighs 25 lbs!
FAST SHIPPING!
AMAZING PRICING!
As always, all items are sold as described, as is, with fast shipping, and with amazing pricing to satisfied customers so no returns are offered or accepted.  Thank you for looking and I hope you are the winner on this auction