DEPENDABLE EQUIPMENTS CONVEYOR 10' x 4" WITH PLASTIC TABLE TOP BELT-

Description

We can adjust or make specific changes to this Conveyor to fit your specific needs and applications. Contact us, we are here to help you.
NEW STAINLESS STEEL 10' x 4" CONVEYOR WITH PLASTIC SPROKET-
DRIVEN CONVEYOR BELT
BRAND
: DEPENDABLE EQUIPMENTS
AVAILABLE WITH THE LATEST TECHNOLOGY "DRUM MOTOR" INSTEAD OF DC GEAR MOTOR UPON REQUEST. PLEASE CONTACT US SO WE CAN ADD THE ADDITIONAL COST TO THE FINAL INVOICE OR IF YOU HAVE ANY QUESTIONS.
CONVEYOR SPECIFICATIONS:
DIMENSIONS: 10 FEET LONG x 4" WIDE
VARIABLE SPEED CONTROL: 0 - 200ft/min
ADJUSTABLE GUIDE RAIL WIDTH: 0 - 7" WIDE
ADJUSTABLE GUIDE RAIL HEIGHT: 3/4" - 2 1/2" H
MAXIMUM WEIGHT CAPACITY: 150 Lbs PER LINEAR FEET
ELECTRICAL REQUIREMENTS: 115V- 1 Hp- 60 Hz
LEGS ARE HEIGHT ADJUSTABLE UP TO 38" HEIGHT
MOTOR SPECIFICATIONS:
BRAND-DAYTON
Technical Specs
Item DC Gear motor
Gear motor Type DC Gear motor
Gear motor Voltage 90VDC
Max. Torque 138.0 in.-lb.
Gear motor Shaft Type Single
Gear motor Shaft Orientation Parallel
Rear Shaft Encoder/Pulse Generator Mounting Yes
Nameplate RPM 50
Gear motor Enclosure Totally Enclosed Non-ventilated
Gear motor Mounting Position All Angle
Length Less Shaft 10-1/8"
Reversible Shaft Output No
Overhung Load 150 lb.
Input HP 1/8
Gear Ratio 36:1
Full Load Amps 1.41
Thermal Protection None
Max. Ambient Temp. 40 Degrees C
Gear motor Rotation CW/CCW
Motor Type Permanent Magnet DC
Overall Length 11-5/8"
Bearings Needle Roller and Thrust Balls on Case, Ball on Motor
Lubrication Permanent Heavy Fluid Gear Oil
Brushes Externally Replaceable
Gear Material Hardened Steel
Gear Case Die Cast Aluminum
Seals On Input and Output Shaft
Housing Material Die Cast Aluminum
Available with the latest technology "DRUM MOTOR" instead of DC Gear Motor UPON REQUEST. Please contact us, we need to add the additional cost to the final invoice.
A drum motor is a one component conveyor drive where the motor, gear drive and all moving parts are enclosed inside the drum. The motor and gears operate in a sealed oil bath ensuring proper lubrication and cooling. With no external motor, gear reducer, sprockets, chain or OSHA required chain guard, no external component maintenance is required.
SPEED CONTROL SPECIFICATIONS:
BRAND-DART
Technical Specs
Item DC Speed Control
Enclosure NEMA 4/12
Max. Amps 3
Voltage Output 0 to 90/180VDC
Speed Range 25:1
Rotation Reversable
External Switches CW/CCW
AC Input Voltage 120/240VAC
DC Speed Control SCR
HP @ Lower Volts 1/50 to 1/3
HP @ Higher Volts 1/25 to 2/3
Linear Acceleration Fixed 0.5 sec.
Current/Torque Limit None
Speed Regulation +/-1% of Base Speed
Shunt Wound Volts 100/200VDC
Accepts Tach Feedback No
Dynamic Braking No
IR Compensation Adjustable
Follower Circuit No
Mount Type Compact Panel
Height 5.5"
Depth 3.5"
Width 3.81"
Operating Temp. -10 Degrees to 45 Degrees C
Standards cULus Recognized
Includes Speed Potentiometer Knob and Dial Plate
BELT SPECIFICATIONS:
Plastic Sprocket-Driven Conveyor Belts
Series 820
An excellent choice for food handling, packaging, and bottling, belts consist of links connected by stainless steel pins. Also known as conveyor chain. Links are FDA-compliant brown acetal and temperature range is ?40° to 194° F, unless otherwise stated.
Straight-running
belts
have overlapping links so there are no gaps.
Wear
strips
attach to conveyor frames up to 1/8" thick to reduce friction and abrasion on your belt. Made of white UHMW polyethylene.
C
USTOMIZATION AVAILABLE TO THE ENTIRE US TERRITORY
REFUND: We will refund any item returned within 14 days of our shipment, provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance.
ONE (1) YEAR WARRANTY ON PARTS
"WE ARE SHIPPING THIS ITEM IN A WOOD CRATE" TO PROTECT IT.
FREE CRATE
LOCATION: HIALEAH, FLORIDA 33016
MADE IN THE USA
WE HAVE OUR OWN MANUFACTURING FACILITY
Freight shipments
must be throughly inspected
prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment has been signed for.
Any damages or missing items must be noted to the freight driver at the time of delivery.
PLEASE CONTACT US IF YOUR HAVE ANY QUESTIONS. WE ARE HERE TO HELP YOU.
THANK YOU